DDJ-FLX6 controls explained
Every button, knob and fader on the Pioneer DDJ-FLX6, and what it's for. Tap a control on the drawing, or scroll down for the full list.
Support for the DDJ-FLX6 is new. If anything doesn't respond, tell us at hello@nosyncclub.com.
Tap any control on the drawing to see what it does.
Every control on the DDJ-FLX6
The decks
- IN/-4 BEATSHIFT: IN ADJUST
- Marks where a loop starts; press loop out on a later beat to repeat everything in between.
- OUTSHIFT: OUT ADJUST
- Marks where a loop ends, so the part since loop in repeats until you leave it.
- RELOOP/EXITSHIFT: ACTIVE LOOP
- Leaves a loop so the track plays on, or starts an instant 4-beat loop when none is playing.
- CUE/LOOP CALL ◀
- Halves a playing loop. With no loop on, it steps back through the cues saved in the track.
- CUE/LOOP CALL ▶
- Doubles a playing loop. With no loop on, it steps forward through the cues saved in the track.
- Jog wheel, outer edge
- Turn the outer edge of the jog wheel to nudge a playing track slightly ahead or behind, to line its beats up.
- Jog wheel, top
- Touch and turn the top of the jog wheel to scratch, or to find your place in a paused track.
- SHIFT
- Hold it to give other buttons their second job, the one printed underneath them.
- CUE
- Jumps back to the cue point, the place you've marked to start from, and plays from it for as long as you hold it.
- PLAY/PAUSE
- Starts the track, and pauses it where it is when pressed again.
- Pad mode buttons
- Picks what the eight pads below do, such as hot cues, beat jumps or samples.
- HOT CUE · SHIFT: KEYBOARD
- PAD FX · SHIFT: KEY SHIFT
- BEAT JUMP · SHIFT: BEAT LOOP
- SAMPLER · SHIFT: SAMPLE SCRATCH
- Performance pads
- Each pad does what the current pad mode says: jump to a hot cue, start a loop, play a sample and more.
- BEAT SYNCSHIFT: TEMPO RANGE
- Matches this track's tempo to the other deck's in one press, so you can mix before you can beatmatch by ear.
- TEMPO
- Speeds the track up or slows it down, so its beats can match the other track's.
- MEMORYSHIFT: DELETE
- Saves the current position as a memory cue in the track, to come back to in later sets.
- JOG CUTTERSHIFT: VINYL
- Turn the jog wheel to add scratch-style cuts to the playing track, in time with the beat, without needing to scratch.
- DECK 3 · DECK 4SHIFT: DUAL
- Switches this side of the controller between two decks, so one set of controls can play either.
- MERGE FX
- Turns the build-up effect on the big knob on and off.
- MERGE FX knob
- Turn it to build up several effects at once, for a big rise into the next track.
The mixer
- TRIM
- Sets how loud the track comes into the mixer, so every track starts at the same level before the fader.
- HI
- Turns the treble up or down: hi-hats, cymbals and the shine on vocals.
- MID
- Turns the middle up or down: vocals, synths and snares.
- LOW
- Turns the bass up or down: the kick and bassline, the part two tracks shouldn't share at once.
- FILTER
- Turn it left to cut the highs or right to cut the lows: a quick way to bring a track in or out smoothly.
- Channel faders
- Sets how much of this channel the room hears; up is louder.
- CROSSFADER
- Slides the room's sound between the left and right channels.
- MASTER LEVEL
- Sets the overall volume of the mix going to the speakers.
- DECK 4/SAMPLER
- Picks whether the fourth channel plays deck 4 or the sampler.
- BOOTH LEVEL
- Sets the volume of a separate pair of speakers pointed at you, so you can hear the mix in a loud room.
Headphones
- Channel CUE
- Sends this channel to your headphones, so you can get the next track ready without the room hearing it.
- MASTER CUE
- Puts what the room hears in your headphones too, to check the whole mix.
- HP LEVEL
- Sets how loud your headphones are.
- HP MIX
- Blends your headphones between the track you're cueing and what the room hears.
The browser
- Browse knob
- Turn it to scroll through your tracks in the library.
- Browse knob, pressed
- Press the browse knob to open or close a folder in your library.
- LOAD
- Puts the track chosen in your library on this deck.
- BACK
- Goes back up a level in your library.
- VIEW
- Changes how much of the library and waveforms the screen shows.
Effects
- FX SELECT
- Picks which effect to use, such as echo or reverb.
- CH SELECT
- Picks which channel the effect is on.
- ◀SHIFT: AUTO
- Makes the effect follow shorter note lengths, like echoes every half beat instead of every beat.
- ▶SHIFT: TAP
- Makes the effect follow longer note lengths, like echoes every two beats instead of every beat.
- LEVEL/DEPTH
- Sets how strong the effect is, from barely there to taking over the sound.
- ON/OFFSHIFT: RELEASE FX
- Turns the effect on and off.
What you can learn on the DDJ-FLX6
19 of 20 lessons work on the DDJ-FLX6.
Getting set up
- Your controller
Stage 01: Beatmatching
- Play a track
- Match the tempo
- Line up the beats
- Your first blend
- Beatmatch by ear
Stage 02: Mixing on the phrase
- Count the bars
- Mix on the phrase
- Levels and meters
- EQ the blend
- Filter the mix
Stage 03: Performance tools
- Hot cues
- Loops
- Beat jump
- Echo outComing later: this lesson doesn't use the DDJ-FLX6's Beat FX yet
Stage 04: Building a set
- Mixing in key
- Choose the next track
- Ride the tempo
- Half-time
- Record a mix
Guides for the DDJ-FLX6
Learn it on your DDJ-FLX6
Plug it in, open Chrome or Edge, and the first lesson tours your own controller. No card needed.