DJControl Inpulse 300 controls explained
Every button, knob and fader on the Hercules DJControl Inpulse 300, and what it's for. Tap a control on the drawing, or scroll down for the full list.
Support for the DJControl Inpulse 300 is new. If anything doesn't respond, tell us at hello@nosyncclub.com.
Tap any control on the drawing to see what it does.
Every control on the DJControl Inpulse 300
The decks
- Jog wheel, outer edge
- Turn the outer edge of the jog wheel to nudge a playing track slightly ahead or behind, to line its beats up.
- Jog wheel, top
- Touch and turn the top of the jog wheel to scratch, or to find your place in a paused track.
- IN
- Marks where a loop starts; press loop out on a later beat to repeat everything in between.
- IN (hold)
- Leaves a loop so the track plays on, or starts an instant 4-beat loop when none is playing.
- OUT
- Marks where a loop ends, so the part since loop in repeats until you leave it.
- SHIFT
- Hold it to give other buttons their second job, the one printed underneath them.
- SYNC
- Matches this track's tempo to the other deck's in one press, so you can mix before you can beatmatch by ear.
- CUE
- Jumps back to the cue point, the place you've marked to start from, and plays from it for as long as you hold it.
- PLAY/PAUSE
- Starts the track, and pauses it where it is when pressed again.
- Pad mode buttons
- Puts the pads in hot cue mode. Hold it for half a second for tone play mode.
- HOT CUE
- ROLL
- SLICER
- SAMPLER
- SAMPLER (hold)
- Performance pads
- Each pad does what the current pad mode says: jump to a hot cue, start a loop, play a sample and more.
- TEMPO
- Speeds the track up or slows it down, so its beats can match the other track's.
- VINYL
- Switches the top of the jog wheel between scratching and nudging, like a record or like a CD player.
- SLIP
- While it's on, the track carries on underneath anything you do, and picks up where it would have been when you stop.
- Q
- Snaps cues, loops and jumps to the nearest beat, so they always land in time.
The mixer
- GAIN
- Sets how loud the track comes into the mixer, so every track starts at the same level before the fader.
- HIGH
- Turns the treble up or down: hi-hats, cymbals and the shine on vocals.
- MID
- Turns the middle up or down: vocals, synths and snares.
- LOW
- Turns the bass up or down: the kick and bassline, the part two tracks shouldn't share at once.
- FILTER
- Turn it left to cut the highs or right to cut the lows: a quick way to bring a track in or out smoothly.
- Channel faders
- Sets how much of this channel the room hears; up is louder.
- MASTER
- Sets the overall volume of the mix going to the speakers.
- CROSSFADER
- Slides the room's sound between the left and right channels.
- BEATMATCH GUIDE
- Turns on lights by the pitch faders and jog wheels that show which way to move each one to match the beats.
Headphones
- Headphone CUE
- Sends this channel to your headphones, so you can get the next track ready without the room hearing it.
- HEADPHONES
- Sets how loud your headphones are.
- MASTER
- Puts what the room hears in your headphones too, to check the whole mix.
The browser
- LOAD
- Puts the track chosen in your library on this deck.
- BROWSE
- Turn it to scroll through your tracks in the library.
- Browse knob, pressed
- Press the browse knob to open or close a folder in your library.
- ASSISTANT
- Suggests tracks that would mix well next. Hold it and turn the browse knob to pick the energy level.
Effects
- ON
- Turns this effects unit on and off.
- FX
- Adjusts one of the unit's effects.
- DRY/WET
- Blends between the plain sound and the sound with effects, from none to all effect.
What you can learn on the DJControl Inpulse 300
19 of 20 lessons work on the DJControl Inpulse 300.
Getting set up
- Your controller
Stage 01: Beatmatching
- Play a track
- Match the tempo
- Line up the beats
- Your first blend
- Beatmatch by ear
Stage 02: Mixing on the phrase
- Count the bars
- Mix on the phrase
- Levels and meters
- EQ the blend
- Filter the mix
Stage 03: Performance tools
- Hot cues
- Loops
- Beat jump
- Echo outNeeds Beat FX, which the DJControl Inpulse 300 doesn't have
Stage 04: Building a set
- Mixing in key
- Choose the next track
- Ride the tempo
- Half-time
- Record a mix
Guides for the DJControl Inpulse 300
Learn it on your DJControl Inpulse 300
Plug it in, open Chrome or Edge, and the first lesson tours your own controller. No card needed.