Founding price: £5 a month instead of £7.50 · until 30 November →

DJControl Inpulse 500 controls explained

Every button, knob and fader on the Hercules DJControl Inpulse 500, and what it's for. Tap a control on the drawing, or scroll down for the full list.

Support for the DJControl Inpulse 500 is new. If anything doesn't respond, tell us at hello@nosyncclub.com.

DECK 1MIXERDECK 2INOUTSHIFTCUE▶/IISYNCTEMPOHOT CUELOOPSLICERSAMPLERLOOPVINYLSLIPQGAINHIGHMIDLOWFILTERCUE1LOADMASTERMASTERHEADPHONESASSISTANTCUE/MASTERMICHIGHLOW1234GAINHIGHMIDLOWFILTERCUE2LOADINOUTSHIFTCUE▶/IISYNCTEMPOHOT CUELOOPSLICERSAMPLERLOOPVINYLSLIPQ

Tap any control on the drawing to see what it does.

Every control on the DJControl Inpulse 500

The decks

Jog wheel, outer edge
Turn the outer edge of the jog wheel to nudge a playing track slightly ahead or behind, to line its beats up.
Jog wheel, top
Touch and turn the top of the jog wheel to scratch, or to find your place in a paused track.
IN
Marks where a loop starts; press loop out on a later beat to repeat everything in between.
OUT
Marks where a loop ends, so the part since loop in repeats until you leave it.
SHIFT
Hold it to give other buttons their second job, the one printed underneath them.
CUE
Jumps back to the cue point, the place you've marked to start from, and plays from it for as long as you hold it.
▶/II
Starts the track, and pauses it where it is when pressed again.
SYNC
Matches this track's tempo to the other deck's in one press, so you can mix before you can beatmatch by ear.
TEMPO
Speeds the track up or slows it down, so its beats can match the other track's.
Pad mode buttons
Switches the pads to hot cues.
  • HOT CUE
  • LOOP
  • SLICER
  • SAMPLER
Performance pads
Each pad does what the current pad mode says: jump to a hot cue, start a loop, play a sample and more.
LOOP
Turn it to pick how many beats a loop lasts; press it to start or stop a loop of that length.
VINYL
Switches the top of the jog wheel between scratching and nudging, like a record or like a CD player.
SLIP
While it's on, the track carries on underneath anything you do, and picks up where it would have been when you stop.
Q
Snaps cues, loops and jumps to the nearest beat, so they always land in time.

The mixer

GAIN
Sets how loud the track comes into the mixer, so every track starts at the same level before the fader.
HIGH
Turns the treble up or down: hi-hats, cymbals and the shine on vocals.
MID
Turns the middle up or down: vocals, synths and snares.
LOW
Turns the bass up or down: the kick and bassline, the part two tracks shouldn't share at once.
FILTER
Turn it left to cut the highs or right to cut the lows: a quick way to bring a track in or out smoothly.
Channel faders
Sets how much of this channel the room hears; up is louder.
MASTER
Sets the overall volume of the mix going to the speakers.
CROSSFADER
Slides the room's sound between the left and right channels.
MIC
Sets how loud the microphone is.
MIC HI
Turns the microphones' treble up or down.
MIC LOW
Turns the microphones' bass up or down.

Headphones

CUE
Sends this channel to your headphones, so you can get the next track ready without the room hearing it.
MASTER
Puts what the room hears in your headphones too, to check the whole mix.
HEADPHONES
Sets how loud your headphones are.
CUE/MASTER
Blends your headphones between the track you're cueing and what the room hears.

The browser

LOAD
Puts the track chosen in your library on this deck.
Browse knob
Turn it to scroll through your tracks in the library.
Browse knob, pressed
Press the browse knob to open or close a folder in your library.
ASSISTANT
Suggests tracks that would mix well next. Hold it and turn the browse knob to pick the energy level.

Effects

FX buttons
Turns one of the unit's effects on and off.

What you can learn on the DJControl Inpulse 500

19 of 20 lessons work on the DJControl Inpulse 500.

Getting set up

  • Your controller

Stage 01: Beatmatching

  • Play a track
  • Match the tempo
  • Line up the beats
  • Your first blend
  • Beatmatch by ear

Stage 02: Mixing on the phrase

  • Count the bars
  • Mix on the phrase
  • Levels and meters
  • EQ the blend
  • Filter the mix

Stage 03: Performance tools

  • Hot cues
  • Loops
  • Beat jump
  • Echo outNeeds Beat FX, which the DJControl Inpulse 500 doesn't have

Stage 04: Building a set

  • Mixing in key
  • Choose the next track
  • Ride the tempo
  • Half-time
  • Record a mix

Guides for the DJControl Inpulse 500

Learn it on your DJControl Inpulse 500

Plug it in, open Chrome or Edge, and the first lesson tours your own controller. No card needed.