Founding price: £5 a month instead of £7.50 · until 30 November →

DDJ-1000 controls explained

Every button, knob and fader on the Pioneer DDJ-1000, and what it's for. Tap a control on the drawing, or scroll down for the full list.

Support for the DDJ-1000 is new. If anything doesn't respond, tell us at hello@nosyncclub.com.

DECK 1MIXERDECK 2BEAT FXINOUT4 BEAT LOOPSHIFTCUE▶/IIBEAT SYNCTEMPOHOTCUEPADFX1BEATJUMPSAMPLERQUANTIZESLIPSLIP REVERSEDECK 1/3JOG ADJUSTMEMORY◀◀▶▶◀▶MASTER TEMPOKEY SYNCKEY RESETBACKVIEWTRIMHIMIDLOWCOLORCUE3INPUTA THRU BTRIMHIMIDLOWCOLORCUE1INPUTA THRU BTRIMHIMIDLOWCOLORCUE2INPUTA THRU BTRIMHIMIDLOWCOLORCUE4INPUTA THRU BCUEMASTER LEVELMIXINGLEVELMICMIC 1MIC 2HILOWCUESAMPLER VOLBOOTH MONITOR◀▶FXCH SELECTLEVEL/DEPTHON/OFFINOUT4 BEAT LOOPSHIFTCUE▶/IIBEAT SYNCTEMPOHOTCUEPADFX1BEATJUMPSAMPLERQUANTIZESLIPSLIP REVERSEDECK 2/4JOG ADJUSTMEMORY◀◀▶▶◀▶MASTER TEMPOKEY SYNCKEY RESETBACKVIEW

Tap any control on the drawing to see what it does.

Every control on the DDJ-1000

The decks

Jog wheel, outer edge
Turn the outer edge of the jog wheel to nudge a playing track slightly ahead or behind, to line its beats up.
Jog wheel, top
Touch and turn the top of the jog wheel to scratch, or to find your place in a paused track.
INSHIFT: IN ADJUST
Marks where a loop starts; press loop out on a later beat to repeat everything in between.
OUTSHIFT: OUT ADJUST / RELOOP
Marks where a loop ends, so the part since loop in repeats until you leave it.
4 BEAT LOOPSHIFT: ACTIVE LOOP
Leaves a loop so the track plays on, or starts an instant 4-beat loop when none is playing.
SHIFT
Hold it to give other buttons their second job, the one printed underneath them.
CUE
Jumps back to the cue point, the place you've marked to start from, and plays from it for as long as you hold it.
▶/II
Starts the track, and pauses it where it is when pressed again.
BEAT SYNCSHIFT: MASTER
Matches this track's tempo to the other deck's in one press, so you can mix before you can beatmatch by ear.
TEMPO
Speeds the track up or slows it down, so its beats can match the other track's.
Pad mode buttons
Picks what the eight pads below do, such as hot cues, beat jumps or samples.
  • HOT CUE · SHIFT: KEYBOARD
  • PAD FX1 · SHIFT: PAD FX2
  • BEAT JUMP · SHIFT: BEAT LOOP
  • SAMPLER · SHIFT: KEY SHIFT
Performance pads
Each pad does what the current pad mode says: jump to a hot cue, start a loop, play a sample and more.
Jog wheel display
Shows the track's tempo, position and time in the middle of the jog wheel.
QUANTIZE
Snaps cues, loops and jumps to the nearest beat, so they always land in time.
SLIPSHIFT: VINYL
Keeps the track running silently underneath while you scratch, loop or reverse, and drops back in where it would have been.
SLIP REVERSESHIFT: REVERSE
Plays the track backwards while held, then carries on from where it would have been.
DECK 1/3 · DECK 2/4
Switches this side of the controller between two decks, so one set of controls can play either.
JOG ADJUST
Sets how heavy the jog wheel feels to turn.
MEMORYSHIFT: CUE/LOOP DELETE
Saves the current position as a memory cue in the track, to come back to in later sets.
◀◀
Skips backwards through the track while held.
▶▶
Skips forwards through the track while held.
◀
Shows the pads' previous page: hot cues 1 to 8 rather than 9 to 16, say.
▶
Shows the pads' next page: hot cues 9 to 16 rather than 1 to 8, say.
MASTER TEMPOSHIFT: TEMPO RANGE
Keeps the track in the same key when you change its tempo, so speeding it up doesn't make it sound higher.
KEY SYNC
Changes this track's key to match the other deck's.
KEY RESET
Puts the track back in its original key.

The mixer

TRIM
Sets how loud the track comes into the mixer, so every track starts at the same level before the fader.
HI
Turns the treble up or down: hi-hats, cymbals and the shine on vocals.
MID
Turns the middle up or down: vocals, synths and snares.
LOW
Turns the bass up or down: the kick and bassline, the part two tracks shouldn't share at once.
COLOR
Turn it left to cut the highs or right to cut the lows: a quick way to bring a track in or out smoothly.
Channel faders
Sets how much of this channel the room hears; up is louder.
INPUT
Picks what the channel plays: a deck from the computer, or a turntable or CD player plugged into the back.
A THRU B
Puts the channel on the crossfader's left side (A), its right side (B), or off it (THRU).
MASTER LEVEL
Sets the overall volume of the mix going to the speakers.
CROSSFADER
Slides the room's sound between the left and right channels.
MIC
Turns the microphones on, or on with the music ducked under them (TALK OVER).
MIC 1 · MIC 2
Sets how loud the microphone is.
MIC HI
Turns the microphones' treble up or down.
MIC LOW
Turns the microphones' bass up or down.
COLOR FX buttons
Picks which effect the COLOR knobs play.
CUE
Plays the sampler in your headphones.
SAMPLER VOL
Sets how loud the sampler plays.
BOOTH MONITOR
Sets the volume of a separate pair of speakers pointed at you, so you can hear the mix in a loud room.

Headphones

Channel CUE
Sends this channel to your headphones, so you can get the next track ready without the room hearing it.
MASTER CUE
Puts what the room hears in your headphones too, to check the whole mix.
MIXING
Blends your headphones between the track you're cueing and what the room hears.
LEVEL
Sets how loud your headphones are.

The browser

BACK
Goes back up a level in your library.
VIEW
Changes how much of the library and waveforms the screen shows.
Browse knob
Turn it to scroll through your tracks in the library.
Rotary selector, pressed
Puts the track chosen in your library on this deck.

Effects

◀SHIFT: AUTO
Makes the effect follow shorter note lengths, like echoes every half beat instead of every beat.
▶SHIFT: TAP
Makes the effect follow longer note lengths, like echoes every two beats instead of every beat.
FX
Picks which effect to use, such as echo or reverb.
CH SELECT
Picks which channel the effect is on.
LEVEL/DEPTH
Sets how strong the effect is, from barely there to taking over the sound.
ON/OFFSHIFT: RELEASE FX
Turns the effect on and off.

What you can learn on the DDJ-1000

19 of 20 lessons work on the DDJ-1000.

Getting set up

  • Your controller

Stage 01: Beatmatching

  • Play a track
  • Match the tempo
  • Line up the beats
  • Your first blend
  • Beatmatch by ear

Stage 02: Mixing on the phrase

  • Count the bars
  • Mix on the phrase
  • Levels and meters
  • EQ the blend
  • Filter the mix

Stage 03: Performance tools

  • Hot cues
  • Loops
  • Beat jump
  • Echo outComing later: this lesson doesn't use the DDJ-1000's Beat FX yet

Stage 04: Building a set

  • Mixing in key
  • Choose the next track
  • Ride the tempo
  • Half-time
  • Record a mix

Guides for the DDJ-1000

Learn it on your DDJ-1000

Plug it in, open Chrome or Edge, and the first lesson tours your own controller. No card needed.