Guide
DDJ-1000 not working? Fixes for no sound and no connection
Most "it's broken" moments on a DJ controller are one of four things: the cable, another app holding the controller, the sound going to the wrong place, or a fader that's down. Work through these in order and you'll usually find it in a couple of minutes.
1. It doesn't connect at all
- Use the USB cable that came with it, or another one you know carries data. Plenty of cables only charge, and a charge-only cable powers the lights but carries no music or controls.
- Plug it straight into your computer, not through a hub or a monitor's USB port.
- Unplug it, wait a few seconds, and plug it back in. Try the other USB port if you have one.
- On Windows, check AlphaTheta's (Pioneer DJ's) support page for its driver, and install it if your DJ software doesn't list the controller.
2. It works in one app but not another
- On Windows, only one app at a time can use the controller. If rekordbox or Serato is open, a second app (a browser included) can't see it. Close the first app, then unplug and replug.
- On a Mac, several apps can share it, but close the ones you're not using to rule them out.
3. It connects but there's no sound
- Check the sound is going to the controller. In rekordbox's audio preferences, choose your controller as the output. If it's set to your laptop's speakers, the controller's headphone socket and master output stay silent.
- Plug your speakers into the controller's master output, not into the computer.
4. There's sound, but not where you want it
Work along the path the sound takes:
- The channel's TRIM knob is up from zero.
- The channel fader is up.
- The crossfader isn't all the way to the other side.
- MASTER LEVEL is up.
- Your speakers are switched on and turned up.
For the headphones:
- The channel's headphone CUE button is on.
- The headphones LEVEL knob is up.
- The headphones MIXING knob isn't turned all the way to the master side.
5. One control does nothing, or the wrong thing
- Check SHIFT isn't stuck down. Many buttons do something else with SHIFT held.
- If a side is switched to deck 3 or 4, that's where your moves are going. Switch it back to deck 1 or 2.
- Close and reopen your DJ software with the controller already plugged in.
On the DDJ-1000
Here's where everything in this guide sits on yours.
Every DDJ-1000 control explained →
It can play four decks, two on each side, and the DECK 1/3 and DECK 2/4 buttons switch each side between them. Switch both sides to deck 1 and deck 2 before you start, or your moves will go to a deck you can't hear.
Support for the DDJ-1000 is new. If anything doesn't respond, tell us at hello@nosyncclub.com.
If you're using No Sync Club: lessons run in Chrome or Edge. On Windows, close rekordbox or Serato first. If the controller still isn't found, unplug and replug it with the lesson open.
Try it on your own decks
Free to start. Plug in your controller and open the first lesson in Chrome or Edge.
Start the first lesson