Guide
How to do an echo out transition
Not every pair of tracks blends. When two tracks clash, or the next one needs to hit hard, an echo out ends the old track on a ring of repeats and drops the new one in clean. It's quick to learn, and it sounds deliberate.
Set up the echo
- In the Beat FX section, choose Echo.
- Point the effect at the channel that's playing now.
- Set the beat length to 1 beat, and LEVEL/DEPTH to about halfway.
- Nothing happens until you press ON/OFF.
Hear it first
Play a track and press ON/OFF. Every sound repeats a beat later, quieter each time. Turn LEVEL/DEPTH up and the repeats get louder and ring longer. Press ON/OFF again to stop.
The transition
- Get the new track ready in your headphones, cued to the 1 of a phrase.
- On the last beat of the old track's phrase, press ON/OFF and pull the old channel's fader straight down. On most controllers the echo comes after the fader, so the repeats keep ringing after the track stops.
- Start the new track on the 1, as the echoes fade.
Use it sparingly
- An echo out is a spice. Once or twice in a set it sounds like a decision. Every transition, and it sounds like you can't blend.
- It's at its best when the tracks really don't fit together: a big change of tempo or key, or a change of genre.
Practise it
No Sync Club's echo out lesson walks you through the setup on your own controller, then checks that you hit the last beat of the phrase.