Founding price: £5 a month instead of £7.50 · until 30 November →

Guide

Gain and TRIM: how to set your levels and stay out of the red

Tracks aren't all mastered to the same loudness. One can be noticeably louder than the next. If you don't even them out, your mix lurches every time you bring a track in. That's what the TRIM knob, sometimes called gain, is for.

What TRIM does

  • TRIM sets how loud a track comes into the mixer, before the EQ and the channel fader.
  • Set it once when you load the track. Then the fader can do the mixing, and full fader means the same loudness for every track.

How to set it

  1. Play the new track in your headphones with the channel fader up and its headphone CUE on.
  2. Watch the channel's level meter during the loudest part. Turn TRIM until that part reaches the top of the green, just into the orange, and never the red.
  3. Do the same for every track you load, and they'll all hit the mixer at the same level.

The red is not more exciting

  • When the meters hit red, the signal is clipping. The tops of the sound are being cut off, and it turns harsh and distorted.
  • A louder mix comes from turning the speakers up, not from pushing the mixer into the red.
  • Keep the master meter out of the red too. If it's hitting red, bring the channels down, not just the master.

No TRIM knobs?

  • Some smaller controllers, like the DDJ-FLX2, have no TRIM knobs.
  • rekordbox can even out track levels for you (its auto gain setting), so the faders do the rest.

Practise it

No Sync Club's levels lesson plays tracks at different loudness and checks you've matched them on the meters.

Practise this

Levels and meters

Lesson 2.3 · 8 min · on your own controller · Headliner