Founding price: £5 a month instead of £7.50 · until 30 November →

DDJ-FLX4 controls explained

Every button, knob and fader on the Pioneer DDJ-FLX4, and what it's for. Tap a control on the drawing, or scroll down for the full list.

DECK 1MIXERBEAT FXDECK 2CUE/LOOPCALLCUE/LOOPCALLBEATINOUT4 BEAT/EXIT<>BEAT SYNCJOG WHEELSHIFTCUEPLAYHOT CUEPAD FXBEAT JUMPSAMPLER12345678TEMPOLOADLOADMIC LEVELSMART CFXHP MIXHP LEVELSMART FADERTRIMHIMIDLOWCFXCUE1TRIMHIMIDLOWCFXCUE2CROSSFADERMASTER LEVELCUECH 1/2/BOTHFX SELECT<>LEVEL/DEPTHON/OFFINOUT4 BEAT/EXIT<>BEAT SYNCJOG WHEELSHIFTCUEPLAYHOT CUEPAD FXBEAT JUMPSAMPLER12345678TEMPO

Tap any control on the drawing to see what it does.

Every control on the DDJ-FLX4

The decks

INSHIFT: IN ADJ
Marks where a loop starts; press loop out on a later beat to repeat everything in between.
OUTSHIFT: OUT ADJ
Marks where a loop ends, so the part since loop in repeats until you leave it.
4 BEAT/EXITSHIFT: ACTIVE
Leaves a loop so the track plays on, or starts an instant 4-beat loop when none is playing.
CUE/LOOP CALL ◀
Halves a playing loop. With no loop on, it steps back through the cues saved in the track.
CUE/LOOP CALL ▶
Doubles a playing loop. With no loop on, it steps forward through the cues saved in the track.
BEAT SYNCSHIFT: TEMPO RANGE
Matches this track's tempo to the other deck's in one press, so you can mix before you can beatmatch by ear.
Jog wheel, outer edge
Turn the outer edge of the jog wheel to nudge a playing track slightly ahead or behind, to line its beats up.
Jog wheel, top
Touch and turn the top of the jog wheel to scratch, or to find your place in a paused track.
SHIFT
Hold it to give other buttons their second job, the one printed underneath them.
CUE
Jumps back to the cue point, the place you've marked to start from, and plays from it for as long as you hold it.
PLAY
Starts the track, and pauses it where it is when pressed again.
Pad mode buttons
Picks what the eight pads below do, such as hot cues, beat jumps or samples.
  • HOT CUE · SHIFT: KEYBOARD
  • PAD FX · SHIFT: PAD FX2
  • BEAT JUMP · SHIFT: BEAT LOOP
  • SAMPLER · SHIFT: KEY SHIFT
Performance pads
Each pad does what the current pad mode says: jump to a hot cue, start a loop, play a sample and more.
TEMPO
Speeds the track up or slows it down, so its beats can match the other track's.

The mixer

MIC LEVEL
Sets how loud the microphone is.
SMART CFXSHIFT: FX SELECT
Turns on a one-knob effect that combines a filter with other sound effects on the channel's FX knob.
SMART FADER
Lets the controller handle tempo, volume and EQ for you as you move the crossfader.
TRIM
Sets how loud the track comes into the mixer, so every track starts at the same level before the fader.
HI
Turns the treble up or down: hi-hats, cymbals and the shine on vocals.
MID
Turns the middle up or down: vocals, synths and snares.
LOW
Turns the bass up or down: the kick and bassline, the part two tracks shouldn't share at once.
CFX
Turn it left to cut the highs or right to cut the lows: a quick way to bring a track in or out smoothly.
Channel faders
Sets how much of this channel the room hears; up is louder.
CROSSFADER
Slides the room's sound between the left and right channels.
MASTER LEVEL
Sets the overall volume of the mix going to the speakers.

Headphones

HP MIX
Blends your headphones between the track you're cueing and what the room hears.
HP LEVEL
Sets how loud your headphones are.
Channel CUE
Sends this channel to your headphones, so you can get the next track ready without the room hearing it.
MASTER CUE
Puts what the room hears in your headphones too, to check the whole mix.

The browser

LOAD
Puts the track chosen in your library on this deck.
Browse knob
Turn it to scroll through your tracks in the library.
Browse knob, pressed
Press the browse knob to open or close a folder in your library.

Effects

CH 1/2/BOTH
Picks which channel the effect is on.
FX SELECT
Picks which effect to use, such as echo or reverb.
BEAT ◀
Makes the effect follow shorter note lengths, like echoes every half beat instead of every beat.
BEAT ▶
Makes the effect follow longer note lengths, like echoes every two beats instead of every beat.
LEVEL/DEPTH
Sets how strong the effect is, from barely there to taking over the sound.
ON/OFFSHIFT: RELEASE FX
Turns the effect on and off.

What you can learn on the DDJ-FLX4

All 20 lessons work on the DDJ-FLX4.

DJ lessons for the DDJ-FLX4 →

Getting set up

  • Your controller

Stage 01: Beatmatching

  • Play a track
  • Match the tempo
  • Line up the beats
  • Your first blend
  • Beatmatch by ear

Stage 02: Mixing on the phrase

  • Count the bars
  • Mix on the phrase
  • Levels and meters
  • EQ the blend
  • Filter the mix

Stage 03: Performance tools

  • Hot cues
  • Loops
  • Beat jump
  • Echo out

Stage 04: Building a set

  • Mixing in key
  • Choose the next track
  • Ride the tempo
  • Half-time
  • Record a mix

Guides for the DDJ-FLX4

Learn it on your DDJ-FLX4

Plug it in, open Chrome or Edge, and the first lesson tours your own controller. No card needed.